Insert view in titleblock wiht correct scale

[Anonymous]

Hello, 

have problem to put the view in the porject. 

Have two view (level 0 and level 1)

With 1:100 scale in floor plans appears as in pic 1 (too small). 

First question: best thing to do in to put the view in a A3 titleblock?

Second question: zooming seems dimension are too large related to the plant.. What can I do...?! 

Reducing the scale? 1:50? Or there is possibility to just reduce dimension?

.rvt attached.

Thank's

[martijn_pater · Accepted solution]

You can have several (sizes of) titleblocks in Revit, or different types of the same titleblock family using parameters. You just have to select (or create) a titleblock that will fit your needs for the viewing scale. Or for fitting multiple views ofcourse on the same sheet.

To create new titleblocks:
If you go to New --> Family --> find folder called Titleblocks --> you can select A3 ie. Edit as you like and load it into your project. 

btw this is 1:100?? it seems off, bit hard to judge the scale though from the image... could be just a large titleblock.

[barthbradley]

Duplicate the view (without detailing), set the appropriate view scale and dimension/annotate it from scratch.  That's the fastest and easiest way IMO/E.  

FWIW: Generally, printed text height should not be less than 3/32".    

[Anonymous]

@martijn_pater 

I choose twoi A3. I put a view for one different titileblock. 

By the way... there is the possibility to aligned the two view exactly in the same position?

"Model line" are not selectable.

Thank's

[martijn_pater]

@AnonymousYou can use Revit's Guide grids for sheet composition. You can set the graphics in VG/Object styles as you like. Personally I like to copy/paste an empty legend with just two intersection reference planes (using reference planes with legends is also how you can snap to those on your title block ie.)

[Anonymous]

You can reduce the size of your dimensions.  Duplicate a dimension style and set it up as you would like it with samller text.

[Anonymous]

@martijn_pater sequential images
 
"You can set the graphics in VG/Object styles as you like. " for dimension on aligned object in block?

In which way, sorry?

"Personally I like to copy/paste an empty legend with just two intersection reference planes (using reference planes with legends is also how you can snap to those on your title block ie.)" ==> can explain me with a sequential images, plase?

Thank's

[Anonymous]

@barthbradley  "Duplicate the view (without detailing), set the appropriate view scale and dimension/annotate it from scratch.  That's the fastest and easiest way IMO/E. "

==>I can't Duplicate a view

Two allign the two ugual object in two titles with the same size (ex. A3) is using the grid?