I have a problem with the revit

[Anonymous]

Why does my Revit work so slowly?

It takes 3-4 seconds to see the blue circle between views.

Could this be a Revit issue or maybe my new Zbook?

[barthbradley]

 What "Blue Circles" between Views? What takes "3-4 seconds"?  Care to be any less cryptic?  

[Anonymous]

I used to say that my rivet works very slowly and I tried to update it, but to no avail Revit 2020 2020 the same problem and I don’t know what the solution is

[Samantha-G]

Hi @Anonymous 

Thank you for the question. Please be sure your computer meets the requirements outlined below;

https://knowledge.autodesk.com/support/revit-products/learn-explore/caas/sfdcarticles/sfdcarticles/S...

It could also be due to the file size that you are working with, is it an empty file?

[Anonymous]

Yes, I have all the requirements and work on all design programs, except for the Revit, it has become very heavy in addition to that the file is not very heavy 

[Samantha-G]

Hi @Anonymous 

Are you working on wifi, and connecting to a server were the central file is located?

As far as those errors I would try doing a repair, on your Revit to see if that corrects it.

[Anonymous]

Yes, I work on Wi-Fi

[Anonymous]

I really am worried because my dependence on designs depends entirely on the revit, I hope you solve my problem and I trust in your capabilities

[Samantha-G]

Hi @Anonymous 

I would try hard wiring the computer. Also I would run a repair on your Revit install.

[Anonymous]

Thank you

[Anonymous]

Will the workers be on Revit 2020 or on Revit 2020?

[Samantha-G]

Hi @Anonymous 

I am not sure what you are asking. Workers?

[Anonymous]

Because after this problem, I downloaded Revit 2021 and Revit 2020 together and now they are upright on my device

[Samantha-G]

Which ever version is throwing the error is the one you would need to repair.

[Anonymous]

Revit 2021

[Samantha-G]

You will repair that one.

[Anonymous]

I would like to know what are the latest developments on my revit

[Tony_Michniewicz]

Based on the images you posted, there are two external tools (aka add-ins) that you have not installed: Advance Steel Extension for Revit & MEP Fabrication: Part Commands.  You need to install each of these components in order to address these errors.

[Anonymous]

Can you please give me the links to install the tools or how can I install or get them

[Anonymous]

I really feel bad