HOW TO MAKE A SLAPPED EDGE OF ROOF

[kagosw0314]

How can I make this kind of roof ??

Thankssssss

[constantin.stroescu]

use a Component>Model in Place >Sweep 

[constantin.stroescu]

[kagosw0314]

Thanks for your reply but I am not trying to make a tube shape 

wanna make like bottom part of the roof slapped

[constantin.stroescu]

or use Voids either as Model in Place or Editable Families..

[kagosw0314]

I am very new to Revit will try your method! Thanks

[kostask_oionei]

Hi,

You can use Floor: Slab Edge with a triangle as profile.

You can try with the attached profile.

Floor: Slab Edge - Edit Type - Duplicate...

[kostask_oionei]

Sorry, I noticed you said "Roof"

You can do the same using "Roof: Fascia"

After you place Fascia, you have to join Roof with Fascia.

[a_liu8DZJQ]

But I cant edit the profile of fascia??

[kagosw0314]

I cant edit the profile of fascia?

[kagosw0314]

I should say i cant join them tgt

[kostask_oionei]

---

@kagosw0314 wrote:

I cant edit the profile of fascia?

---

After loading (Import - Load Family) the profile you can edit it from Project Browser - Families - Profiles.

Find the profile, expand, right click and choose Type Properties...

You can edit both width and height separately.

[kostask_oionei]

---

@kagosw0314 wrote:

I should say i cant join them tgt

---

Hi,

I describe from beginning all the steps.

1. You have already design the Roof

2. Tab Architecture - Roof: Fascia

3. Select the edge or Tab and select to select the perimeter

4. Tab Modify - Join - Join Geometry

5. Click the Roof and the Fascia (the order doesn't matter)

6. Roof and Fascia must have the same material.