how to draw this models in Revit?

[riswanthespy]

hi guys IDK the names of these . How to create these families? or else is there any site which provide families like these? Any suggestions ?

[ToanDN]

Try SketchUp 3dwarehouse and import the SKP in a Revit family.

[riswanthespy]

i cant find these models either in sketch up too, but if we transfer from sketch up the materials are affected. any suggestions please?

[hmunsell]

how detailed/accurate do they need to be? You could try to do a Model-in-Place and model the general shape and depth.      

[barthbradley · Accepted solution]

Fleur-De-Lys are a dime a dozen. Check BIMObject.com.

Here's one: 

See attached.  

[barthbradley]

...if you are talking about the corbels, you can get there any number of ways on your own in Revit, but Google "Corbel Revit Family" first.  I would. No need to reinvent the wheel if a suitable one already exists on line.  

[riswanthespy]

Thanks Barthbradly .. It's good . But i need a group of families like this but i found only few. Is there any websites to have roman design families like this .. like pillar designs like i shown in the picture, it'll be helpfull for me.

Thanks in Advance...

[riswanthespy]

Yeah i can model in place but it'll take too much time and we have to be more precise . That's why if there's any websites provide free roman families like this it would be very helpfull ...

Thanks in advance..

[mhiserZFHXS]

Precise as in exactly like the ones pictured? You should probably start modeling, because I doubt you'll find something exactly the same as these online.

[hmunsell]

besides what @barthbradley mentioned, you'd have to do a internet search and see what you can find.  In the time we have been talking about this you probably could have Modeled them in place 😁. 

[riswanthespy]

haha.. yeah i should do that