how to change wall color in plan view

[Anonymous]

Can someone please tell me how to change the wall color in plan view? It currently displays gray and I would like it to be black.

thanks!

[Anonymous]

Can someone please tell me how to change the wall color in plan view? It currently displays gray and I would like it to be black.

thanks!

[ToanDN]

Are they under a previous Phase? Can you share a screenshot of the View and its properties palette?

[ToanDN]

Are they under a previous Phase? Can you share a screenshot of the View and its properties palette?

[rudi.roux · Accepted solution]

Hi @Anonymous, 

As @ToanDN mentioned, select your wall and scroll down to your "Phasing" in your Properties Pallet, make sure that it is set to "New Construction".

Apart from that, you can go to your Visibility/Graphics Overrides and apply a cut pattern to your walls as shown below. 

I hope this helps! 

[rudi.roux · Accepted solution]

Hi @Anonymous, 

As @ToanDN mentioned, select your wall and scroll down to your "Phasing" in your Properties Pallet, make sure that it is set to "New Construction".

Apart from that, you can go to your Visibility/Graphics Overrides and apply a cut pattern to your walls as shown below. 

I hope this helps! 

[FGPerraudin · Accepted solution]

hi @Anonymous,

Might be just in the properties of your wall.

If your view is in coarse detail , change the coarse scale display property in the family type properties:

see attached picture.

François

[FGPerraudin · Accepted solution]

hi @Anonymous,

Might be just in the properties of your wall.

If your view is in coarse detail , change the coarse scale display property in the family type properties:

see attached picture.

François

[RDAOU · Accepted solution]

@Anonymous Hi

in not sure it's a phasing issue...that you will need to confirm so someone can guid u with phase filters

otherwise; considering the various types of walls on a layout (some filled and some not) when I want to use solid filled walls I would either

1. use Course Scale Fill Pattern/Color (you can find that under type properties... select walls > edit type > Graphics )
2. OR I would set up a Filter (by parameter)
3. last choice and if it is global to the view I would override the visibility graphics of all walls (I rarely use this one)

[RDAOU · Accepted solution]

@Anonymous Hi

in not sure it's a phasing issue...that you will need to confirm so someone can guid u with phase filters

otherwise; considering the various types of walls on a layout (some filled and some not) when I want to use solid filled walls I would either

1. use Course Scale Fill Pattern/Color (you can find that under type properties... select walls > edit type > Graphics )
2. OR I would set up a Filter (by parameter)
3. last choice and if it is global to the view I would override the visibility graphics of all walls (I rarely use this one)

[Anonymous]

Thanks everyone for your help with this!

[Anonymous]

Thanks everyone for your help with this!