How to add Bullnose and flashings to Corrugated steel roof sheeting(IBR sheet) ?

[Anonymous]

Hi

I am currently designing a pumpstation in Revit 2018.

1. I have created the roof sheeting already (see picture attached)

2. I cannot get the sheeting to curve around the edges so that I have a Bullnose (similar to picture 2 attached)

3. I also need to add flashings to join the roof to the vertical sheets.

Please let me know if anyone has any idea on how to do this.

[barthbradley]

Roof by Extrusion should do the trick.  

You could then apply the flashing using the Roof Fascia tool.  

[Anonymous]

@barthbradley  Thanks however I need it to also display the profile of the corrugated metal sheeting as the screenshot attached. Any work around this ?

Thanks

[barthbradley]

You mean actually modeled the corrugations?  How? Extruded profile(s)?  I would do the same for the rounded edge.  Extrude a profile along a rounded path (e.g. Sweep) that is shaped like your "quonset" roof edge.  I would do two sweeps, one for the "innie" and one for the "outtie" and then Array both together in a Line-Based Family.  That would probably be the easiest way to go about it.  Do you understand the concept?  

[JJWGallagher]

Is there any reason you're trying to model the corrugated metal roof? It would be much more efficient to use a model pattern on the roof and detail components where applicable.