Help - Creating 6"x48" Running bond hatch pattern

[Anonymous]

Hi there,

I used to use hatch22 but my company has since gotten rid of it. Can anyone help me create a 6"x48" running bond .pat file?

THANK you!

[cbcarch]

Download and install PyRevit. (free--search online)

It has a similar Hatch Pattern Creation Tool.

You draw lines, select them, and it creates the .pat file.

Then assign the custom pattern to your model/material.

[Jason_S · Accepted solution]

---

@Anonymous wrote:

Hi there,

I used to use hatch22 but my company has since gotten rid of it. Can anyone help me create a 6"x48" running bond .pat file?

THANK you!

---

See attached.   I had to zip it because the PAT file would attach.

[Pattycake_Kyle · Accepted solution]

PAT file for download: 48" x 6" Running Bond 50% Offset 

No add-ins to figure out or anything to install. And currently the largest library of free .PAT files you can find.

Our PRO accounts have access to template where you can iterate countless number of settings for custom PAT files. (where this is created from - GIF of that below). Cheers! 🎂

6x48 with 50% offset

[hugha · Accepted solution]

This pattern contains two elements: one unbroken horizontal and one broken vertical.

;-------------------------------------------------------------------------------
; Written by HatchKit 4 Professional Edition
; HatchKit 4 Professional Edition (c)1990-2020 Cadro Pty Ltd
; www.hatchkit.com.au/
;-------------------------------------------------------------------------------
;%VERSION=3.0
;%UNITS=INCH
*48x6 Running Bond
;%TYPE=MODEL
0,0,0,0,6
90,0,0,-6,24,6,-6

hth,

Hugh Adamson

[Anonymous]

thank you everyone!!!