Hardware Acceleration disabled

[Anonymous]

Hello,

I just bought an iMac : 

iMac (Retina 5K, 27 pouces, fin 2015)

3,3 GHz Intel Core i5

8 Go 1867 MHz DDR3

AMD Radeon R9 M395 2048 Mo

And I'm running Revit 2015/or 2016 via parrallels desktop 11.

The message "Hardware acceleration disabled. Software emulation mode is in use" is stopping the process everytime.

Can somebody advise please ?

Many thanks 🙂

Marina

[e_azzam]

@Anonymous

hi,

this is caused by your graphic card not supported by revit,

chech here if ur graphic card certified or not 

http://usa.autodesk.com/adsk/servlet/syscert?siteID=123112&id=18844534&results=1&stype=graphic&product_group=2&release=2015&os=8192&manuf=2&opt=1

[Anonymous]

Hi @e_azzam

Thanks for your answer.

My card is not certified. The card name is Parallels Display Adaptater WDDM.

So is there any other way to run Revit on my computer ?

Thanks for your help.

[Anonymous]

any resolution on this?

also, am i correct in assuming the disabling of the hardware acceleration is may be to blame for frequent graphic issues and crashing?

[ennujozlagam]

@Anonymous hello try to lower your display setting  to 1920 x 1080 and see if this helps. thanks