GRID LINE DISAPPEAR WHEN I CHANGE ITS NUMBER

[basma_salman]

I have a problem when I change the name of the grid line it disappear from the plan but it is showing in the elevations and sections

[alberto-secondi]

Could you share more details? Revit version or anything that may be relevant.

Could it be a filter in your view or view template?

To check that create a brand new floor plan on the same level and see if you still get the same error. The new view should reset all the VG stuff. 90% of quirky issues like that get solved when I create new views.

HTH!

[barthbradley]

Do you have rule-based Filters acting on the View?  

[barthbradley]

You say: "when I open the ground floor plan there is grid G when I change it into C it disappears from plans but it shows in elevations and sections" 

I am surprised Revit didn't throw an error on you. You can't change G to C because you already have a C, and that's what you are seeing in Elevation/Section. You are seeing the existing Grid C .  

Open your "ELEVATION 03" and Reveal Hidden Elements. You'll immediately see the Grid  G displayed in the View just to to the left of your Grid C.  

[basma_salman]

yes I know that because GRID C is not appearing in my plans but it is only appearing in sections and elevations,
try to delete grid G and solve my problem to show grid C in plans

[basma_salman]

No

[barthbradley · Accepted solution]

This Filter is acting on the Ground Floor View.  Remove the Filter from Ground Floor View and Grid C will be visible. 

[basma_salman]

thank you very much😁