Floor issue

[Luke.Gawthorp]

Does anyone ever have this issue.

I have created floors but not they are just coming up as a double cross hatch for some reason...

They was showing fine previously, I don't know if this is due to level change?

Any assistance is appreciated.

[Simon_Weel]

Seems to me like a cut pattern in the applied material.

[Luke.Gawthorp]

Update,

This seems to happen when i set the gravel at 300mm if i do it at 100mm it shows... the max depth i can do of the gravel (cross hatch) is 180mm.

Any assistance is appreciated.

[Simon_Weel]

Sorry - I fail to see the problem?

[Luke.Gawthorp]

when i make the gravel thickness 300mm it then hatched the whole floor (image on original post) if reduced to 180mm it then appears as show in second image.

I believe it maybe to do with the slope... How would i fix this.

[hmunsell]

what is the structure of your Floor? 

[Luke.Gawthorp]

see below

[ToanDN]

Try moving Rome layers out of Core.

[hmunsell]

i don't have your materials :-), but i duplicated your structure and do not have the same issue.

I'm in inches vs MM, but that shouldn't matter 😉

Would you be able to upload your model? or a basic model with just these floors in them showing the issue.