Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Exporting to CAD scale issue

7 ANTWORTEN 7
Antworten
Nachricht 1 von 8
csawyerM6DRT
449 Aufrufe, 7 Antworten

Exporting to CAD scale issue

Hi there! When exporting to CAD from Revit, the drawing is getting scaled down, so it is at a scale when opening in AutoCAD. I have checked my export units---snip attached of the current settings. Any insights would be greatly appreciated! 

7 ANTWORTEN 7
Nachricht 2 von 8
ToanDN
als Antwort auf: csawyerM6DRT


@csawyerM6DRT wrote:

Hi there! When exporting to CAD from Revit, the drawing is getting scaled down, so it is at a scale when opening in AutoCAD. I have checked my export units---snip attached of the current settings. Any insights would be greatly appreciated! 


Scaled down to what? 90%, half, quarter?

Nachricht 3 von 8
csawyerM6DRT
als Antwort auf: ToanDN

Hi @ToanDN Thanks for the quick reply! It appears to be doing something like 1:10---so 10' in our drawing is coming up as 10" in CAD---see attached screen grab. 

 

 

Thank you! 

Nachricht 4 von 8
ToanDN
als Antwort auf: csawyerM6DRT


@csawyerM6DRT wrote:

Hi @ToanDN Thanks for the quick reply! It appears to be doing something like 1:10---so 10' in our drawing is coming up as 10" in CAD---see attached screen grab. 

 

 

Thank you! 


That is 1:12.  What are you Project Units set to?

Nachricht 5 von 8
csawyerM6DRT
als Antwort auf: csawyerM6DRT

@ToanDN oh yes, you're correct! Attached are the current Project Unit settings.

 


Thank you,

Nachricht 6 von 8
ToanDN
als Antwort auf: csawyerM6DRT


@csawyerM6DRT wrote:

Attached are the current Project Unit settings.

 


No, I am asking for your Project Units settings, not Export settings.  Look for it under Manage > Project Units.

Nachricht 7 von 8
csawyerM6DRT
als Antwort auf: csawyerM6DRT

Oh sorry about that, @ToanDN ---I attached the wrong image. here you go! 

Nachricht 8 von 8
ToanDN
als Antwort auf: csawyerM6DRT


@csawyerM6DRT wrote:

Oh sorry about that, @ToanDN ---I attached the wrong image. here you go! 


Nothing unusual.

Can you share the model?

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report