Edge profile for precast extension

[CRJFusco]

So I am trying out the revit precast extension for my company and was wondering of their is a way to set up a mirrored edge condition when you split walls. Our company makes precast walls and it makes a slight bevel to the edge with a chamfer at the exterior. I have made the profile for both sides of the panel but have to, currently, manually replace the inverted edge style. Is there a way to change this by default or might this be a feature we will be getting to the program in the future.

[Lakshman01]

@CRJFusco  Hello,

Yes. You can create bevel chamfer edge in your wall by creating Wall Reveal profile. Automatically turns in to edge profile.,

Thanks

[CRJFusco]

I have made a profile that is what I need. It works fine on one side of the formed panel but flips to the wrong orientation messing up the look at the formed joint.

[Lakshman01]

Okay. Is possible could you attach the error as a snapshot? 

[CRJFusco]

So the joint on the left I went in and change the left half of it manually by making an inverted profile and loading that one. On the right is how it innately comes in.

[CRJFusco]

A slight addition to this thread. My company makes precast walls and at exterior facing corners we have a chamfer on all three exposed edges of the panels. So the wall with its edge flush with the face of the other has both edges chamfered and the wall who's edge faces the interior face of the other has the chamfer on the exterior face. Is there a way to make that a default profile?