DWG EXPORT, COLOUR SETTING FOR 'EXPORT BYLAYER & OVERRIDES BYENTITY'

[526996629]

When I do dwg export by layer and do not export overrides, I can directly set the colors in the color ID as shown below.

526996629_0-1650729079556.png

However, when I do export by layer and overrides by entity, the colors of the lines in the exported dwg are not affected by the Revit color IDs shown in the image. Does anyone know how to control the colors here? 

[barthbradley]

Export Setup 423.png

[526996629]

Thanks for your reply. That's set. I think there is some overrides on the walls which I didn't find out.

I have attached a revit file and Please use my export setting to export it. You will then see the dwg shown like the image below.

526996629_0-1650731613071.png

The green wall is correct and the white ones are not showing the colour.

[526996629]

Hi Barthbradley, I just noticed it's because I got the cut line style ticked which leads to the results above. All good now, thanks!

[barthbradley]

---

@526996629 wrote:

The green wall is correct and the white ones are not showing the colour.

---

Okay here. 

DWG Export 423.png