Double window is not displaying properly

[S.J.terSchure]

Hi all,

I'm working on a stacked window family in Revit 2022. When I finished my family and loaded it into the project, the window didn't cut properly (it shows the top window in the cut view). According to other forum topics, I had to set my view range in the family editor, but this didn't solve the problem and still the top window is being cut in the plan view inside the project. Also changing the Frame/Mullion category into not visible in plan wouldn't solve the problem.

Am I missing something?

ElevationPlan view in the projectView from the family editorWindow settings

[ennujozlagam]

you need to edit your family and add symbolic lines to reference level to show once it loaded? thanks

[S.J.terSchure]

Thank you for your answer. But this solution is just adding lines that would be displayed in my view. Isn't there an option where the geometry of the sweeps is cutting correct? And not showing what is above my cut plane?

[ennujozlagam]

you can try plan region, view range and set the setting value ? thanks

[RDAOU]

@S.J.terSchure 

Upload the family you created

[barthbradley]

.  

[barthbradley]

Toggle your "Preview Visibility" ON in the Family and post a screenshot of what you see in the Family Plan View.  

[ToanDN · Accepted solution]

Check the family and see if the window sashes are set to be visible in Plan/RCP and for the detail levels you want them to show.

[S.J.terSchure]

This tip definitely helped a lot. Thank you!