Don't show cut plane on section box

[sergio.sme87]

Hello. I am working in a Revit project with underground utilities, and I would like to know if any one knows how to see in a section box under de toposurface. I mean to not appear this cutplane on the left and looks something similar to the right.

Thanks.

[barthbradley]

You mean you want to hide the Section Box?  

...or do you mean that your Toposurface large enough to cut and show a poche at at a certain location.  If so,  edit and enlarge the Topo 

[ToanDN]

VG and turn off Topography Cut Pattern.

[barthbradley]

FWIW: Poche is controlled via the Site Settings dialog box under the Site and Massing tab.  

[Anonymous]

Hello. I tried what you both said but nothing change. I mean When I cut the toposurface with the section box I would like to hide the cut pattern, and just leave thin layer of toposurface. I Change cut pattern on V/G to no visible, and change elevation of poche base to a elevation higher than my highest point, but is not working. Any other ideas.

Thanks

[Anonymous]

Sorry I reply with different account but is still me. Sergio

[Anonymous]

Adjust your section box so that it doesn't cut the topo.

[ToanDN]

Split the topo near you want to cut then hide in view the part outside of the section box.