Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

dependant views symbols

4 ANTWORTEN 4
Antworten
Nachricht 1 von 5
DavidRichardson
318 Aufrufe, 4 Antworten

dependant views symbols

Hi, I have floor plan too big to fit on a single sheet, I have split using dependant views. Is there are way I can show the elevation and section markers in both parts of the floor plan. They are only showing on the plan portion where they are contained in the cropped region.  Is there a way of dupicating the symbol or some other suggestion?

thanks

Dave

4 ANTWORTEN 4
Nachricht 2 von 5
azad.Nanva
als Antwort auf: DavidRichardson

could you send a Screenshot?

If it solves your problem, please click Accept to enhance the Forum.
Nachricht 3 von 5
ennujozlagam
als Antwort auf: DavidRichardson

try matchline and see if helps?

 

ennujozlagam_0-1718094302593.png

 





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
Nachricht 4 von 5
RSomppi
als Antwort auf: DavidRichardson




@DavidRichardson wrote:

Hi, I have floor plan too big to fit on a single sheet, I have split using dependant views. Is there are way I can show the elevation and section markers in both parts of the floor plan. They are only showing on the plan portion where they are contained in the cropped region.  Is there a way of dupicating the symbol or some other suggestion?


 

It is normal behavior for them to show where they exist within the crop region. If you need additional sections and elevations, you can create new ones or use the parent view to copy the existing ones from one part to the other.

Nachricht 5 von 5
ToanDN
als Antwort auf: DavidRichardson

Use Match Line and View Reference.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report