Cut_Join Components

[dm0144]

Hello everyone!!!

How can I make the right connection between two modeled in place gutters and modeled in place pipe using join or cut tool?

I am attaching an image of the actual joint.

[bin · Accepted solution]

Cut the Gutter 1 using Void 1, Cut the Gutter 2 using Void 2, then cut them using Void 3.

Or you can create the Gutter 1+ Gutter 2 using a sweep, then only need to cut it using Void 3.

Is this a box gutter? You might need sump and overflow?