Custom Wall profile

[Amiran_Janashvili]

Hi everyone,

I am new in Revit community and have some difficulties with creating custom profile for walls. I want to create cross-section profile and draw several walls. I found out that it is possible to model a shape with "model in place" tool but this gives me only one element, while I need to draw several walls. Can anyone help?

I need several walls with this cross-section.

[hmunsell]

Duplicate Post.....

https://forums.autodesk.com/t5/revit-structure-forum/wall-cut-profile/td-p/10104728

[ToanDN]

You can use a stacked wall.
https://knowledge.autodesk.com/support/revit-products/learn-explore/caas/CloudHelp/cloudhelp/2020/EN...

[syman2000]

Stack wall is probably the easiest like @ToanDN said. However you can use wall profile embedded into wall as well. As another alternative, you can also use curtainwall to achieve the same result. See attached

[Amiran_Janashvili]

I think embedded profile is exactly what I need. Can you tell me how to do it?

[syman2000 · Accepted solution]

You have to edit the wall, then go to section and then add the profile.

You can edit the profile width and height from the project browser>family

[Amiran_Janashvili]

Thank You!