curtain wall add louver

[BIM_Dreamer]

hi, i changed the louver panel to empty system panel how im going to bring back the louver panel. undo is not an option. thank you

[ToanDN]

Tab to select the empty panel then pin it, or manually change it to the louver type.

[BIM_Dreamer]

i tried that so many times using TAB  to select but cannot select anything (i really dont know what is the reason?) at the end i have to redo it again. thanks you for your time.

[Viveka_CD]

Hi @BIM_Dreamer

Did you use a downloaded custom louvre family?

Regards,

[bimscape]

Do you have your cursor over the "edge" of the Curtain Wall Panel when you are Tabbing? If so, you should cycle through Curtain Grid, Curtain Panels (each side of the grid line, etc)- until you get to the panel you need to select.

[Viveka_CD]

Hi @BIM_Dreamer

If you find posts have helped with your problem, please click on 'Accept as solution' to help others with similar questions. - Thank you.