create void shape

Anonymous · ‎10-16-2020

I want to create a void in the present geometry so i get the same result like the drawing. but i cant seem to figure out how to draw the shape in 2D. I cant seem to draw it in section because "the angle is to steep"

Mohamed-Nassar · ‎10-16-2020

what about Void in place

----------------------------------------------------------------------------------
If the above reply answers your question; Please mark it with ACCEPT SOLUTION
----------------------------------------------------------------------------------

Mohamed Nassar , ACP, Autodesk Ambassador Gold
BIM Support / Structure Modeler

_Vijay · ‎10-16-2020

@Anonymous if you can not create a single void, if the geometry complex Crete part by part. it may lit bit slow, but it will work.

Vijayakumar
Head of BIM
Did you find this post helpful? Feel free to like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

barthbradley · ‎10-16-2020

It's all about Work Planes in Revit.

https://knowledge.autodesk.com/support/revit-products/learn-explore/caas/CloudHelp/cloudhelp/2018/EN...

You can create a Work Plane via Naming a Reference Plane. Then it's just a matter of setting that named RP as the Current Work Plane so that you can draw on it.

https://knowledge.autodesk.com/support/revit-products/learn-explore/caas/CloudHelp/cloudhelp/2016/EN...

Community

create void shape

create void shape

create void shape