Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I have made a corrugated roof/cladding system using a beam system. it works like cladding, after you create a roof you can simply choose the area of the roof you want to be corrugated as your work plane and the beam system will appear as 1200mm panels of corrugated cladding. works in ALL views. took me a while to find out how to make it so i thought id save other people the time.
I havent used it on a conical shaped roof as of yet, i dont think Revit will like it much as they are beams not an actual rooftype, you may end up with lots of overlapping edges. the way i use it on a mono or dual pitch roof is in 1200 centre beams along the same plane as the roof, this gives a seamless corrugated panel over the whole span of that part of the roof. (with is not a fully working roof type its a quick fix, its actually a beam system)
