Correct hight railing from stairs

[torrenti]

Hello, to put a stairs with stairs by step the railing on landing is not well anchored.

Tryed to modify dimension with baluster placemnt but don't go well. 

Tryed to put as base "top railing and after that the offset to arrived to the landing but even that don't go (att. 3 and 4). 

Any ideas?

Thank's

[torrenti]

Att with base as top railing with 900 offset.

[PijPiwo · Accepted solution]

Just split the sketch line at the landing.

[torrenti]

To allign the balusters and put one of them when begin the slope on left side (att 2)?

[PijPiwo · Accepted solution]

See picture.

[torrenti]

If now have what in att 1 ?

Someone can samy what what meaning that underlight in att 2?

Project attachaed

[ennujozlagam]

@torrenti hello, check attached file if it is acceptable to you. thanks

[PijPiwo]

---

@torrenti wrote:

If now have what in att 1 ?

Someone can samy what what meaning that underlight in att 2?

Project attachaed

---

The description of each function is in your help menu - here and here. The best way to learn is to play/experiment with them and see what they do.

Please compare your rail setting with my picture posted in my previous post. Make them the same and funny looking objects will go away.

[torrenti]

I think is better but in several rail the total railing from 2 sides and manage these.