Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I created a sheet that has a 1/16 scale view and a callout at 1/4 scale. I was asked to add a 1/8 scale and change the 1/4 scale view to reference the 1/8 scale and the 1/8 scale to reference the 1/16 scale. If I try to copy the callout to the 1/8 view it creates a new callout. If I try and delete the callout anno off the 1/16 plan it tries to delete the callout view. Is there a way to change the 1/4 referring view to show on the 1/8 view and change the anno on the 1/8 to refer to the 1/8.
I created a sheet that has a 1/16 scale view and a callout at 1/4 scale. I was asked to add a 1/8 scale and change the 1/4 scale view to reference the 1/8 scale and the 1/8 scale to reference the 1/16 scale. If I try to copy the callout to the 1/8 view it creates a new callout. If I try and delete the callout anno off the 1/16 plan it tries to delete the callout view. Is there a way to change the 1/4 referring view to show on the 1/8 view and change the anno on the 1/8 to refer to the 1/8.
