Cavity door OTB show door leaf not full frame size

[wisedrawing]

anyone have an idea for Revit OTB cavity door family how to get it to show the door leaf size rather than the full width of the cavity framing??

[barthbradley · Accepted solution]

Revit doesn't have a "Cavity" Door in my OOTB Content Library.   Post the one you are working with here so we can see what you need to do.  

FWIW: 

If the door leaf width is controlled via a Parameter that is not an available Label in the Tag Family, you can open the Family and make that door leaf width parameter a Shared Parameter. Then you can load that door width Shared Parameter into the Tag Family.  

If the door leaf is a nested family and is Shared, you could TAB-Select it to Tag it separately. 

[ToanDN · Accepted solution]

That can be easily added to a door family (if you need to tag) or a door schedule.

[wisedrawing]

brilliant work thanks, I have had that cavity door in for so long I forgot that I found it somewhere else bathbradley, with both your inputs here I just went back to the family, and into family types, and found the door width which had a formula that added multiplication of the door size and then some additional width - so I deleted that bit of type and its fixed - thanks heaps