Building wont show in elevation

holl0481
Contributor
Contributor

Building wont show in elevation

holl0481
Contributor
Contributor
‎04-05-2021 02:10 AM
I have a bit of a problem, my building wont show up in the west elevation. So I deleted the elevation marker and recreated it but it still doesn't show. I also tried extending my crop region but still cannot find it. I tried show hidden elements too, but its not hidden. I turned off far clipping too. What should I do? 
Report
0 Likes
Reply
Accepted solutions (1)
Solution 1
1,309 Views
3 Replies
Tags
Replies (3)

ennujozlagam
Mentor
Mentor
‎04-05-2021 03:09 AM
Accepted solution

you go your plan view > click your elevation > untick those at extent > adjust the view. please see attached. thanks

 

elev.JPG





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
Report
0 Likes

holl0481
Contributor
Contributor
in reply to ennujozlagam
‎04-05-2021 12:34 PM

Edit: I misunderstood for a sec there but YES this was the solution, thank you! 

Report
0 Likes

syman2000
Mentor
Mentor
‎04-05-2021 12:39 PM

Check the phase of your elevation and set it to the New Construction.

Check out my Revit youtube channel - https://www.youtube.com/user/scourdx
Report
0 Likes
Report a website issue