Assign split material to split region

[vick1z]

How can I assign different material if the finish is split in vertical 3 different parts ?

This is architectural wall vertically compound wall

pls see attached image

[joe_keogh]

Hi @vick1z 

You could try using a Stacked Wall, they do have their limitations, but worth trying.

First create the 3 wall types with desired finish, then add them to the Stacked wall definition

[vick1z]

My apology not not stacked , vertically compound wall

[joe_keogh · Accepted solution]

Perhaps a curtain wall then using different wall types as the Curtain Wall Panels

[barthbradley · Accepted solution]

Yes. 

https://knowledge.autodesk.com/support/revit-products/learn-explore/caas/CloudHelp/cloudhelp/2015/EN...

[vick1z · Accepted solution]

You are spot on @barthbradley  this is what I was exactly looking for. Thanks for helping me in this.

also @joe_keogh  thanks for your input too.

[mcookmanWPEA9]

what was the solution, link doesnt work