Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Allow an annotation family label to have a different units format than project

2 ANTWORTEN 2
GELÖST
Antworten
Nachricht 1 von 3
brentonwiberg
1418 Aufrufe, 2 Antworten

Allow an annotation family label to have a different units format than project

I am making an egress annotation tag.  I'm using a parameter to calculate the required egress width based on my occupancy input, the tag then displays the required egress width via a label.  The problem is that I want the egress width displayed to be in inches, not whatever the project settings are that the tag gets loaded into.  I though that changing the unit format in the egress annotation family would solve this, but as soon as I load the tag into a project, it displays the label in feet and fractional inches, which is the project setting not what I set in the annotation family.  Anyone have a solve for this?

2 ANTWORTEN 2
Nachricht 2 von 3
barthbradley
als Antwort auf: brentonwiberg

Units.png

Nachricht 3 von 3
omkar.patil9LTV5
als Antwort auf: brentonwiberg

Thanks a ton!

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report