Add Level info to Topography Scedule for each pad

[Anonymous]

Hi,

I cannot find a way to add the level info to the topography schedule.

Schedule nicely lists cut and fill volumes but I would like to see at what level the pads are located as well. (Yes, Levels are there at the N/E/W/S elevation views).

[BIM.Consultant]

Create a new schedule, expand site and choose "Pads". There you will see the option to add the "Level" field.

[Anonymous]

Thanks a lot. That's great !

Is there a way to get that "level" parameter available in pads schedule into Topography schedule where cut and fill volumes are available or vice-versa ?

[BIM.Consultant]

Level is a parameter for building pad. Cut/Fill values are for topography. The answer would be no.

But you can create 2 schedules, remove the header from one of them. Then you can make them appear as 1 schedule when you place them on the sheet.

[Anonymous]

I did that but the look is not nice. You have to enter names twice and make the columns at equal widths so the raws would match etc...

Cut/Fill volumes calculated based on the level entered, so the level is info is there and should be made available to be used in topo schedules.

Hope Autodesk implements that in the future versions.