Recap Scan Data not Visible

[bim]

I had just finished registering / indexing a decent size capture (~60 scans). I was checking the registration through various Limit Box adjustments and deleted one of the scans. I had isolated a scan by ALT-Clicking the visibility of one of the scans. I attempted to ALT-Click a second time to make them all visible again that nothing happened. I then clicked each scan individually to get them to all show back up.

I 'Reset' the Limit Box and all of the point cloud data is no longer visible... I can see the scanner spheres. All of the scan locations are visible on the side panel. I can enter registration mode and everything shows up fine. If I attempt to use the view cube to see top / side / corner views it zooms in so the origin grid fills the entire screen. 

[Patrick_Aps_9121]

On the right side, above your Scan Locations, there is Scan Regions

maybe the region "unassigned points" , which may contain all points, is set to invisible ?

If you cannot solve it.

Start a new Project.

Import the RCS files from the support folder of this project and skip registration upon import.

This import is much faster than importing the original files.

[anil_mistry]

Hi @bim,

I'm just checking in to see if you need more help with this. Did the suggestion that @Patrick_Aps_9121 provided work for you?

If so, please click Accept as Solution on the posts that helped you so others in the community can find them easily.

[bim · Accepted solution]

I tried all of the normal visibility settings. I needed to add another 30 scans to the project, so I imported the new scans, registered them manually and upon finishing the new registration, everything was visible again. Was not able to reproduce or figure out what happened

[anil_mistry]

Hi @bim,

Thank you for your reply and I am glad to hear that the issue is now resolved. Please, let us know if you have any other questions or concerns. 

Thank you and have a great day!

[Anonymous]

I am facing the same issue. After registration and geo referencing, the point cloud is not visible though the image spheres are visible at the correct coordinates.

[yan.fu]

Try reset the limit box and adjust the far / near plan in the project setting. 

Thanks,

Yan