feature set slot finishing toolpath goto rapid every step

[amberg47]

hello anybody when i make feature set slot finishing program its goes to rapid movment when take next stepdown.

can any one help me to control spare rapid movement in this program?

for more understand please follow image

[iamcdn79 · Accepted solution]

You probably have your 1st choice links set to safe. Change it to circular arc or on surface 

[amberg47]

no 

no effect

[iamcdn79]

Your pic shows 1st choice as safe and 2nd choice set as on surface, make 1st choice set as on surface and 2nd choice as safe or skim

[amberg47]

please check this 1 and its no change made in toolpath movements

[iamcdn79]

check the box on where it says  apply constraints

[Sudhira · Accepted solution]

---

@amberg47wrote:

hello anybody when i make feature set slot finishing program its goes to rapid movment when take next stepdown.

can any one help me to control spare rapid movement in this program?

for more understand please follow image

Hi,

Is your issue is resolved or you are still looking for more ideas ?

If you need support, please attach the PowerMILL project.

BR,

Sudhira Dora

---

[amberg47]

here is i attach a project file and please open it and help me

thanks

[Sudhira]

---

@amberg47wrote:

here is i attach a project file and please open it and help me

thanks

---

Hi Amberg,

Thanks for your feed back. I looked your project and concluded that you are intentionally cut the CAD part, so that the toolpath highlight as red color i.e. not safe. So first unchecked the Gouge option in Toolpath connection tab. In short links choose On Surface. For more info, please see the attached video as well as the revised project. Expect this will resolve your issue.

Video Link: http://autode.sk/2Hwofjp

If you will satisfy with my support, please accept the solution.

BR,

Sudhira Dora