Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Submitted byAnonymouson03-26-201904:28 AM
Status:
Gathering Support
optimizing the cooling layout with parametric study
if we can change the cooling layout in terms of spacing of channels, location of channels and sizes of the channels, addition or removal of baffles etc. it will really help in optimizing the cooling layout.
It would be really helpful, if software can tentatively provide the optimum channel layouts based on the first run.
Customer requirement: In the cooling analysis, the results show that the local temperature of the product is too high. In the future, the software can automatically optimize the water channels layout, making the temperature distribution of the product uniform.
Through parameterized control, including automatic optimization of water channels diameter, length, and distance. Customer demand: We hope that the Moldflow software can achieve this function, or we can see if there are future plans for research and development in this area.
