2D pocket counter bore empty toolpath

[Anonymous]

Hello,

I am trying to drill a counter bore hole. I have a drill operation for the thru hole portion that is working and I am trying to use a 2D pocket operation for the bore. I am selecting the bottom edge of the pocket and I am using a .25 diameter end mill. When i create the feature it loads fine but gives me an empty toolpath. I've watched a ton of videos and it seems like i'm doing it right but its still not working. Any help would be greatly appreciated!

Thanks!

Christian

[Anonymous · Accepted solution]

My guess would be the helical ramp in is to large for the hole it is trying to machine. I think that is under the linking tab. If you turn down the "Helical Ramp Diameter" Setting it should work.

[Anonymous]

Thank you! That fixed the problem and allowed me to create the tool path!

[Anonymous]

Why don't you use Bore instead of 2D pocket?