Community
Inventor Programming - iLogic, Macros, AddIns & Apprentice
Inventor iLogic, Macros, AddIns & Apprentice Forum. Share your knowledge, ask questions, and explore popular Inventor topics related to programming, creating add-ins, macros, working with the API or creating iLogic tools.
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.
Translate
Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
Message 1 of 3
Anonymous
394 Views, 2 Replies
02-24-2002
11:16 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
Part Volume
Not applicable
02-24-2002
11:16 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
I need a little help taking care of a client who needs to be able to add the
part volume to his drawing information (title block). He makes plastic parts
and would like this information to help with costing information. He would
like for the information to be parametrically linked to the model so that
the updates are automatic as his design matures.
Any help would be appreciated
Carl Smith
CADvantage, Inc
888-891-1700
part volume to his drawing information (title block). He makes plastic parts
and would like this information to help with costing information. He would
like for the information to be parametrically linked to the model so that
the updates are automatic as his design matures.
Any help would be appreciated
Carl Smith
CADvantage, Inc
888-891-1700
02-24-2002
11:16 PM
Part Volume
I need a little help taking care of a client who needs to be able to add the
part volume to his drawing information (title block). He makes plastic parts
and would like this information to help with costing information. He would
like for the information to be parametrically linked to the model so that
the updates are automatic as his design matures.
Any help would be appreciated
Carl Smith
CADvantage, Inc
888-891-1700
part volume to his drawing information (title block). He makes plastic parts
and would like this information to help with costing information. He would
like for the information to be parametrically linked to the model so that
the updates are automatic as his design matures.
Any help would be appreciated
Carl Smith
CADvantage, Inc
888-891-1700
2 REPLIES 2
Message 2 of 3
Anonymous
in reply to:
Anonymous
02-25-2002
06:48 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
Not applicable
02-25-2002
06:48 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
Carl,
I'm looking at this small problem to and I think
5.3 will be the easy answer, because it's possible to create macro that is
executed automatically when the part is saved (AutoSave macro)
5.3 will be the easy answer, because it's possible to create macro that is
executed automatically when the part is saved (AutoSave macro)
In release 5 you need to make a add-in to get the
same functionality
same functionality
This basic VBA example should run on both versions,
it only works when the part is opened as a single document (watch
out for word-wraps!!)
it only works when the part is opened as a single document (watch
out for word-wraps!!)
Public Sub AutoSave()
Dim oCompDef As
ComponentDefinition
Dim TotalMass, TotalVolume As
Double
Dim oProp As
Property
Dim oPropSet As
PropertySet
On Error Resume Next
Set oCompDef =
ThisApplication.ActiveDocument.ComponentDefinition
oCompDef.MassProperties.Accuracy =
k_High
TotalMass =
oCompDef.MassProperties.Mass
TotalVolume =
oCompDef.MassProperties.Volume
'Add
a custom property "TotalMass" with the Part Mass
Set
oPropSet =
ThisApplication.ActiveDocument.PropertySets("{D5CDD505-2E9C-101B-9397-08002B2CF9AE}")
oPropSet.Item("Totalmass").Delete
'The check of unit type
must be enhanced to all the possibilities
If
ThisApplication.ActiveDocument.UnitsOfMeasure.MassUnits = kKilogramMassUnits
Then
Call
oPropSet.Add(Format((TotalMass / 1000), "#0.####") & " kg",
"Totalmass")
Else
Call
oPropSet.Add(Format((TotalMass / 453.59237), "#0.####") & " lb",
"Totalmass")
End If
'Add a custom property "TotalVolume" with the Part
Volume
Set oPropSet =
ThisApplication.ActiveDocument.PropertySets("{D5CDD505-2E9C-101B-9397-08002B2CF9AE}")
oPropSet.Item("TotalVolume").Delete
'The check of unit
type must be enhanced to all the possibilities
If
ThisApplication.ActiveDocument.UnitsOfMeasure.LengthUnits =
kMillimeterLengthUnits Then
Call
oPropSet.Add(Format(TotalVolume, "#0.0####") & " mm^3",
"TotalVolume")
Else
Call
oPropSet.Add(Format(TotalVolume, "#0.0####") & " in^3",
"TotalVolume")
End If
ComponentDefinition
Dim TotalMass, TotalVolume As
Double
Dim oProp As
Property
Dim oPropSet As
PropertySet
On Error Resume Next
Set oCompDef =
ThisApplication.ActiveDocument.ComponentDefinition
oCompDef.MassProperties.Accuracy =
k_High
TotalMass =
oCompDef.MassProperties.Mass
TotalVolume =
oCompDef.MassProperties.Volume
'Add
a custom property "TotalMass" with the Part Mass
Set
oPropSet =
ThisApplication.ActiveDocument.PropertySets("{D5CDD505-2E9C-101B-9397-08002B2CF9AE}")
oPropSet.Item("Totalmass").Delete
'The check of unit type
must be enhanced to all the possibilities
If
ThisApplication.ActiveDocument.UnitsOfMeasure.MassUnits = kKilogramMassUnits
Then
Call
oPropSet.Add(Format((TotalMass / 1000), "#0.####") & " kg",
"Totalmass")
Else
Call
oPropSet.Add(Format((TotalMass / 453.59237), "#0.####") & " lb",
"Totalmass")
End If
'Add a custom property "TotalVolume" with the Part
Volume
Set oPropSet =
ThisApplication.ActiveDocument.PropertySets("{D5CDD505-2E9C-101B-9397-08002B2CF9AE}")
oPropSet.Item("TotalVolume").Delete
'The check of unit
type must be enhanced to all the possibilities
If
ThisApplication.ActiveDocument.UnitsOfMeasure.LengthUnits =
kMillimeterLengthUnits Then
Call
oPropSet.Add(Format(TotalVolume, "#0.0####") & " mm^3",
"TotalVolume")
Else
Call
oPropSet.Add(Format(TotalVolume, "#0.0####") & " in^3",
"TotalVolume")
End If
'Uses
i.e. the Cost Center value to the Part Mass as a workaround because the a model
custom property can't be transferred to the drawing
Set
oProp =
ThisApplication.ActiveDocument.PropertySets("{32853F0F-3444-11D1-9E93-0060B03C1CA6}").ItemByPropId(9)
'The check of unit type must be enhanced to all the
possibilities
If
ThisApplication.ActiveDocument.UnitsOfMeasure.MassUnits = kKilogramMassUnits
Then
oProp.Value =
(Format((TotalMass / 1000), "#0.####") & " kg")
Else
oProp.Value =
(Format((TotalMass / 453.59237), "#0.####") & "lb")
End If
'Uses i.e. the Authority
value to the Part Volume as a workaround because the a model custom property
can't be transferred to the drawing
Set oProp =
ThisApplication.ActiveDocument.PropertySets("{32853F0F-3444-11D1-9E93-0060B03C1CA6}").ItemByPropId(43)
'The check of unit type must be enhanced to all the
possibilities
If
ThisApplication.ActiveDocument.UnitsOfMeasure.LengthUnits =
kMillimeterLengthUnits Then
oProp.Value = (Format(TotalVolume, "#0.0####") & "
mm^3")
Else
oProp.Value = (Format(TotalVolume, "#0.0####") & "
in^3")
End If
End Sub
"CD Smith" <
href="mailto:carl@cadvantage.net">
size=2>carl@cadvantage.net> wrote in
message
href="news:ECDCB4713B014572CA5496B21ADF5E07@in.WebX.maYIadrTaRb">
face=Arial
size=2>news:ECDCB4713...
face=Arial size=2>...
> I need a little href="mailto:carl@cadvantage.net">
size=2>carl@cadvantage.net> wrote in
message
href="news:ECDCB4713B014572CA5496B21ADF5E07@in.WebX.maYIadrTaRb">
face=Arial
size=2>news:ECDCB4713...
face=Arial size=2>...
help taking care of a client who needs to be able to add the
> part volume
to his drawing information (title block). He makes plastic parts
> and
would like this information to help with costing information. He would
>
like for the information to be parametrically linked to the model so
that
> the updates are automatic as his design matures.
>
>
Any help would be appreciated
>
> Carl Smith
> CADvantage,
Inc
> 888-891-1700
>
>
02-25-2002
06:48 AM
Carl,
I'm looking at this small problem to and I think
5.3 will be the easy answer, because it's possible to create macro that is
executed automatically when the part is saved (AutoSave macro)
5.3 will be the easy answer, because it's possible to create macro that is
executed automatically when the part is saved (AutoSave macro)
In release 5 you need to make a add-in to get the
same functionality
same functionality
This basic VBA example should run on both versions,
it only works when the part is opened as a single document (watch
out for word-wraps!!)
it only works when the part is opened as a single document (watch
out for word-wraps!!)
Public Sub AutoSave()
Dim oCompDef As
ComponentDefinition
Dim TotalMass, TotalVolume As
Double
Dim oProp As
Property
Dim oPropSet As
PropertySet
On Error Resume Next
Set oCompDef =
ThisApplication.ActiveDocument.ComponentDefinition
oCompDef.MassProperties.Accuracy =
k_High
TotalMass =
oCompDef.MassProperties.Mass
TotalVolume =
oCompDef.MassProperties.Volume
'Add
a custom property "TotalMass" with the Part Mass
Set
oPropSet =
ThisApplication.ActiveDocument.PropertySets("{D5CDD505-2E9C-101B-9397-08002B2CF9AE}")
oPropSet.Item("Totalmass").Delete
'The check of unit type
must be enhanced to all the possibilities
If
ThisApplication.ActiveDocument.UnitsOfMeasure.MassUnits = kKilogramMassUnits
Then
Call
oPropSet.Add(Format((TotalMass / 1000), "#0.####") & " kg",
"Totalmass")
Else
Call
oPropSet.Add(Format((TotalMass / 453.59237), "#0.####") & " lb",
"Totalmass")
End If
'Add a custom property "TotalVolume" with the Part
Volume
Set oPropSet =
ThisApplication.ActiveDocument.PropertySets("{D5CDD505-2E9C-101B-9397-08002B2CF9AE}")
oPropSet.Item("TotalVolume").Delete
'The check of unit
type must be enhanced to all the possibilities
If
ThisApplication.ActiveDocument.UnitsOfMeasure.LengthUnits =
kMillimeterLengthUnits Then
Call
oPropSet.Add(Format(TotalVolume, "#0.0####") & " mm^3",
"TotalVolume")
Else
Call
oPropSet.Add(Format(TotalVolume, "#0.0####") & " in^3",
"TotalVolume")
End If
ComponentDefinition
Dim TotalMass, TotalVolume As
Double
Dim oProp As
Property
Dim oPropSet As
PropertySet
On Error Resume Next
Set oCompDef =
ThisApplication.ActiveDocument.ComponentDefinition
oCompDef.MassProperties.Accuracy =
k_High
TotalMass =
oCompDef.MassProperties.Mass
TotalVolume =
oCompDef.MassProperties.Volume
'Add
a custom property "TotalMass" with the Part Mass
Set
oPropSet =
ThisApplication.ActiveDocument.PropertySets("{D5CDD505-2E9C-101B-9397-08002B2CF9AE}")
oPropSet.Item("Totalmass").Delete
'The check of unit type
must be enhanced to all the possibilities
If
ThisApplication.ActiveDocument.UnitsOfMeasure.MassUnits = kKilogramMassUnits
Then
Call
oPropSet.Add(Format((TotalMass / 1000), "#0.####") & " kg",
"Totalmass")
Else
Call
oPropSet.Add(Format((TotalMass / 453.59237), "#0.####") & " lb",
"Totalmass")
End If
'Add a custom property "TotalVolume" with the Part
Volume
Set oPropSet =
ThisApplication.ActiveDocument.PropertySets("{D5CDD505-2E9C-101B-9397-08002B2CF9AE}")
oPropSet.Item("TotalVolume").Delete
'The check of unit
type must be enhanced to all the possibilities
If
ThisApplication.ActiveDocument.UnitsOfMeasure.LengthUnits =
kMillimeterLengthUnits Then
Call
oPropSet.Add(Format(TotalVolume, "#0.0####") & " mm^3",
"TotalVolume")
Else
Call
oPropSet.Add(Format(TotalVolume, "#0.0####") & " in^3",
"TotalVolume")
End If
'Uses
i.e. the Cost Center value to the Part Mass as a workaround because the a model
custom property can't be transferred to the drawing
Set
oProp =
ThisApplication.ActiveDocument.PropertySets("{32853F0F-3444-11D1-9E93-0060B03C1CA6}").ItemByPropId(9)
'The check of unit type must be enhanced to all the
possibilities
If
ThisApplication.ActiveDocument.UnitsOfMeasure.MassUnits = kKilogramMassUnits
Then
oProp.Value =
(Format((TotalMass / 1000), "#0.####") & " kg")
Else
oProp.Value =
(Format((TotalMass / 453.59237), "#0.####") & "lb")
End If
'Uses i.e. the Authority
value to the Part Volume as a workaround because the a model custom property
can't be transferred to the drawing
Set oProp =
ThisApplication.ActiveDocument.PropertySets("{32853F0F-3444-11D1-9E93-0060B03C1CA6}").ItemByPropId(43)
'The check of unit type must be enhanced to all the
possibilities
If
ThisApplication.ActiveDocument.UnitsOfMeasure.LengthUnits =
kMillimeterLengthUnits Then
oProp.Value = (Format(TotalVolume, "#0.0####") & "
mm^3")
Else
oProp.Value = (Format(TotalVolume, "#0.0####") & "
in^3")
End If
End Sub
"CD Smith" <
href="mailto:carl@cadvantage.net">
size=2>carl@cadvantage.net> wrote in
message
href="news:ECDCB4713B014572CA5496B21ADF5E07@in.WebX.maYIadrTaRb">
face=Arial
size=2>news:ECDCB4713...
face=Arial size=2>...
> I need a little href="mailto:carl@cadvantage.net">
size=2>carl@cadvantage.net> wrote in
message
href="news:ECDCB4713B014572CA5496B21ADF5E07@in.WebX.maYIadrTaRb">
face=Arial
size=2>news:ECDCB4713...
face=Arial size=2>...
help taking care of a client who needs to be able to add the
> part volume
to his drawing information (title block). He makes plastic parts
> and
would like this information to help with costing information. He would
>
like for the information to be parametrically linked to the model so
that
> the updates are automatic as his design matures.
>
>
Any help would be appreciated
>
> Carl Smith
> CADvantage,
Inc
> 888-891-1700
>
>
Message 3 of 3
Anonymous
in reply to:
Anonymous
02-25-2002
10:01 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
Not applicable
02-25-2002
10:01 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
Thanks Patrick
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
"Patrick de Stobbeleir" <
href="mailto:pdsa@hotmail.com">pdsa@hotmail.com> wrote in message
href="news:63032EBA4CB9EAD622F4832E777B8F4F@in.WebX.maYIadrTaRb">news:63032EBA4CB9EAD622F4832E777......
Carl,
I'm looking at this small problem to and I think
5.3 will be the easy answer, because it's possible to create macro that is
executed automatically when the part is saved (AutoSave macro)
In release 5 you need to make a add-in to get the
same functionality
This basic VBA example should run on both
versions, it only works when the part is opened as a single
document (watch out for word-wraps!!)
Public Sub AutoSave()
Dim oCompDef As
ComponentDefinition
Dim TotalMass, TotalVolume As
Double
Dim oProp As
Property
Dim oPropSet As
PropertySet
On Error Resume
Next
Set oCompDef =
ThisApplication.ActiveDocument.ComponentDefinition
oCompDef.MassProperties.Accuracy =
k_High
TotalMass =
oCompDef.MassProperties.Mass
TotalVolume =
oCompDef.MassProperties.Volume
'Add a custom property "TotalMass" with the Part Mass
Set oPropSet =
ThisApplication.ActiveDocument.PropertySets("{D5CDD505-2E9C-101B-9397-08002B2CF9AE}")
oPropSet.Item("Totalmass").Delete
'The check of unit
type must be enhanced to all the possibilities
If
ThisApplication.ActiveDocument.UnitsOfMeasure.MassUnits = kKilogramMassUnits
Then
Call
oPropSet.Add(Format((TotalMass / 1000), "#0.####") & " kg",
"Totalmass")
Else
Call
oPropSet.Add(Format((TotalMass / 453.59237), "#0.####") & " lb",
"Totalmass")
End If
'Add a custom property "TotalVolume" with the Part
Volume
Set oPropSet =
ThisApplication.ActiveDocument.PropertySets("{D5CDD505-2E9C-101B-9397-08002B2CF9AE}")
oPropSet.Item("TotalVolume").Delete
'The check of unit
type must be enhanced to all the possibilities
If
ThisApplication.ActiveDocument.UnitsOfMeasure.LengthUnits =
kMillimeterLengthUnits Then
Call
oPropSet.Add(Format(TotalVolume, "#0.0####") & " mm^3",
"TotalVolume")
Else
Call
oPropSet.Add(Format(TotalVolume, "#0.0####") & " in^3",
"TotalVolume")
End If
'Uses
i.e. the Cost Center value to the Part Mass as a workaround because the a
model custom property can't be transferred to the
drawing
Set oProp =
ThisApplication.ActiveDocument.PropertySets("{32853F0F-3444-11D1-9E93-0060B03C1CA6}").ItemByPropId(9)
'The check of unit type must be enhanced to all the
possibilities
If
ThisApplication.ActiveDocument.UnitsOfMeasure.MassUnits = kKilogramMassUnits
Then
oProp.Value =
(Format((TotalMass / 1000), "#0.####") & " kg")
Else
oProp.Value =
(Format((TotalMass / 453.59237), "#0.####") & "lb")
End If
'Uses i.e. the Authority
value to the Part Volume as a workaround because the a model custom property
can't be transferred to the drawing
Set oProp =
ThisApplication.ActiveDocument.PropertySets("{32853F0F-3444-11D1-9E93-0060B03C1CA6}").ItemByPropId(43)
'The check of unit type must be enhanced to all the
possibilities
If
ThisApplication.ActiveDocument.UnitsOfMeasure.LengthUnits =
kMillimeterLengthUnits Then
oProp.Value = (Format(TotalVolume, "#0.0####") & "
mm^3")
Else
oProp.Value =
(Format(TotalVolume, "#0.0####") & " in^3")
End
If
End Sub
"CD Smith" <> I need a little
href="mailto:carl@cadvantage.net">
size=2>carl@cadvantage.net> wrote in
message
href="news:ECDCB4713B014572CA5496B21ADF5E07@in.WebX.maYIadrTaRb">
face=Arial
size=2>news:ECD...
face=Arial size=2>...
help taking care of a client who needs to be able to add the
> part
volume to his drawing information (title block). He makes plastic
parts
> and would like this information to help with costing
information. He would
> like for the information to be parametrically
linked to the model so that
> the updates are automatic as his design
matures.
>
> Any help would be appreciated
>
> Carl
Smith
> CADvantage, Inc
> 888-891-1700
>
>
02-25-2002
10:01 PM
Thanks Patrick
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
"Patrick de Stobbeleir" <
href="mailto:pdsa@hotmail.com">pdsa@hotmail.com> wrote in message
href="news:63032EBA4CB9EAD622F4832E777B8F4F@in.WebX.maYIadrTaRb">news:63032EBA4CB9EAD622F4832E777......
Carl,
I'm looking at this small problem to and I think
5.3 will be the easy answer, because it's possible to create macro that is
executed automatically when the part is saved (AutoSave macro)
In release 5 you need to make a add-in to get the
same functionality
This basic VBA example should run on both
versions, it only works when the part is opened as a single
document (watch out for word-wraps!!)
Public Sub AutoSave()
Dim oCompDef As
ComponentDefinition
Dim TotalMass, TotalVolume As
Double
Dim oProp As
Property
Dim oPropSet As
PropertySet
On Error Resume
Next
Set oCompDef =
ThisApplication.ActiveDocument.ComponentDefinition
oCompDef.MassProperties.Accuracy =
k_High
TotalMass =
oCompDef.MassProperties.Mass
TotalVolume =
oCompDef.MassProperties.Volume
'Add a custom property "TotalMass" with the Part Mass
Set oPropSet =
ThisApplication.ActiveDocument.PropertySets("{D5CDD505-2E9C-101B-9397-08002B2CF9AE}")
oPropSet.Item("Totalmass").Delete
'The check of unit
type must be enhanced to all the possibilities
If
ThisApplication.ActiveDocument.UnitsOfMeasure.MassUnits = kKilogramMassUnits
Then
Call
oPropSet.Add(Format((TotalMass / 1000), "#0.####") & " kg",
"Totalmass")
Else
Call
oPropSet.Add(Format((TotalMass / 453.59237), "#0.####") & " lb",
"Totalmass")
End If
'Add a custom property "TotalVolume" with the Part
Volume
Set oPropSet =
ThisApplication.ActiveDocument.PropertySets("{D5CDD505-2E9C-101B-9397-08002B2CF9AE}")
oPropSet.Item("TotalVolume").Delete
'The check of unit
type must be enhanced to all the possibilities
If
ThisApplication.ActiveDocument.UnitsOfMeasure.LengthUnits =
kMillimeterLengthUnits Then
Call
oPropSet.Add(Format(TotalVolume, "#0.0####") & " mm^3",
"TotalVolume")
Else
Call
oPropSet.Add(Format(TotalVolume, "#0.0####") & " in^3",
"TotalVolume")
End If
'Uses
i.e. the Cost Center value to the Part Mass as a workaround because the a
model custom property can't be transferred to the
drawing
Set oProp =
ThisApplication.ActiveDocument.PropertySets("{32853F0F-3444-11D1-9E93-0060B03C1CA6}").ItemByPropId(9)
'The check of unit type must be enhanced to all the
possibilities
If
ThisApplication.ActiveDocument.UnitsOfMeasure.MassUnits = kKilogramMassUnits
Then
oProp.Value =
(Format((TotalMass / 1000), "#0.####") & " kg")
Else
oProp.Value =
(Format((TotalMass / 453.59237), "#0.####") & "lb")
End If
'Uses i.e. the Authority
value to the Part Volume as a workaround because the a model custom property
can't be transferred to the drawing
Set oProp =
ThisApplication.ActiveDocument.PropertySets("{32853F0F-3444-11D1-9E93-0060B03C1CA6}").ItemByPropId(43)
'The check of unit type must be enhanced to all the
possibilities
If
ThisApplication.ActiveDocument.UnitsOfMeasure.LengthUnits =
kMillimeterLengthUnits Then
oProp.Value = (Format(TotalVolume, "#0.0####") & "
mm^3")
Else
oProp.Value =
(Format(TotalVolume, "#0.0####") & " in^3")
End
If
End Sub
"CD Smith" <> I need a little
href="mailto:carl@cadvantage.net">
size=2>carl@cadvantage.net> wrote in
message
href="news:ECDCB4713B014572CA5496B21ADF5E07@in.WebX.maYIadrTaRb">
face=Arial
size=2>news:ECD...
face=Arial size=2>...
help taking care of a client who needs to be able to add the
> part
volume to his drawing information (title block). He makes plastic
parts
> and would like this information to help with costing
information. He would
> like for the information to be parametrically
linked to the model so that
> the updates are automatic as his design
matures.
>
> Any help would be appreciated
>
> Carl
Smith
> CADvantage, Inc
> 888-891-1700
>
>
Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
Forums Links
Can't find what you're looking for? Ask the community or share your knowledge.
Post to forums
