There aren't any parameters in this case. When you leave a sketch partially
constrained Inventor solves it the best it can given the information you've
given it. We could expose the auto dimensioning at some time in the future,
but currently it's not high on the priority list.
-Brian
"Keith Dugal" wrote in message
news:6708095B2BCC583AC225C0DCAC79A674@in.WebX.maYIadrTaRb...
> OK, so no auto dimensioning. Why don't I tell you what I was trying to
get
> and maybe there is another way.
>
> When you create a 3D part and don't dimension the sketch, the parameters
are
> not listed in the model parameters window. So I was thinking about how to
> get them. Are there parameters somewhere that describe these dimensions
> that weren't dimensioned in the sketch? So if there are then no problem.
> Auto dimensioning would not be needed in my case.
>
>
> Thanks,
> Keith
>
>
> "Keith Dugal" wrote in message
> news:99313D7967A4110822EEB559B146820C@in.WebX.maYIadrTaRb...
> > Hey Brian,
> >
> > How about tools for auto dimensioning? Any plans for that in the
future?
> >
> > Thanks,
> > Keith
> >
> >
> > "Brian Ekins" wrote in message
> > news:7F6BF768EB2019F7DF5D3B6AECC30722@in.WebX.maYIadrTaRb...
> > > Automatic constraint creation isn't currently supported. The tools
are
> > > there now that someone could write a function that would do it. We've
> > also
> > > discussed providing a method to automatically add constraints to an
> > existing
> > > sketch, but that capability is not currently scheduled.
> > >
> > > -Brian
> > >
> > > "Keith Dugal" wrote in message
> > > news:028C665400E9FEE89DEBEF2F63476948@in.WebX.maYIadrTaRb...
> > > > Is there a way to auto dimension a sketch? I couldn't find how to
do
> > it.
> > > > Thanks.
> > > >
> > > > Keith
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>