Tutorial for Inventor LT 2020

[rickNX3LL]

Hi

  I have just purchased Autodesk Inventor LT 2020 i have been using Auto Cad 2D for nearly 20 years and trying to make the switch to 3D to present some images for some equipment we manufacture to our clients.  Having problems trying to get some good relevant tutorials, has anyone got any suggestions    Thanks in advance 

[johnsonshiue]

Hi! You could google the terms "Autodesk Inventor Tutorials." You should see a lot of links on Autodesk Knowledge Network and YouTube.com. Start with Sketch and Part Modeling. LT does not allow assemblies and sheet metal parts to be created. Those tutorials do not apply to LT.

Many thanks!

[CaglarDURAN · Accepted solution]

@rickNX3LL 

There is a training prepared by Prota Altar technology on youtube pretty good quality. I definitely recommend

https://www.youtube.com/watch?v=dRteXXdlrtI&list=PLIME9uHie3jBVe4a4gBFNeeDQE7xgktpg 

[rickNX3LL]

Thanks for your reply, i was hoping for an LT 2020 specific tutorial. It appears there not many specific tutorials around, there is plenty for the inventor professional i know there are simular but when trying to follow step by step instructions then suddenly you dont have an icon that they have it makes it difficult. 

Again thanks so much for your reply and i will keep trying 

[CaglarDURAN]

@rickNX3LL 

Are these videos what you want? Videos created for autodesk inventor 2020

https://www.youtube.com/watch?v=nbwglko3kak&list=PL-ptF2slHtJDXMTniyuBgISdbRjVq_yjQ 

[PaulMunford · Accepted solution]

Here are some more great tutorials, just ignore the ones about assemblies!

https://www.autodesk.co.uk/campaigns/inventor-trial-center