transparancy

[Anonymous]

I have an .ipt part with contains multiple extrusions etc.. . I have an Extrusion (New Solid) which is Green in Color. On top of the Green color Extrusion is another Extrusion (New Solid) which is set as Clear. How do i have the Green Extrusion visible behind the Clear Extrusion?

Currently i cannot see the Green Extrusion behind the Clear Extrusion

Inventor 2013 Commercial

IJC

[TheCADWhisperer]

Multi-body solids.

[Anonymous]

I was using multi-body solids but it appears White and not see through

[SBix26]

What version of Inventor?  Can you post the file here (or a non-proprietary example)?

Sam B

Inventor Professional 2017.3.1
Vault Workgroup 2017.0.1
Windows 7 Enterprise 64-bit, SP1
Inventor Certified Professional

[Anonymous]

Inventor 2013

I made a quick dummy file. It works here but not no the proper model. I will need to have a closer look

I posted the dummy file here anyway

IJC

[mcgyvr]

---

@ijc wrote:

Inventor 2013

I made a quick dummy file. It works here but not no the proper model. I will need to have a closer look

I posted the dummy file here anyway

IJC

---

If it works there it should work in the other..

Check to make sure your local style for that appearance is actually transparent and ensure you have assigned that appearance to the proper multi-solid body..

[JDMather]

---

@ijc wrote:

Inventor 2013

I posted the dummy file here anyway

---

iProperties indicates that you have not installed the Service Packs and Updates for 2013.

[johnsonshiue]

Hi! You may want to check where the appearance style is applied to. If it is applied to the feature generating the body or a face, transparency would be off. It is because it would look odd when you look into inner faces of the model. If a transparent appearance style is applied to a solidbody, it should work.

On top of my head, I can think of one particular workflow leading to this behavior is Make Components or Derive. If you have a transparent appearance style like Glass applied to a body in a multi-solid body part. Then you derive the solid into another part. The Glass will not look transparent. It is because the body appearance is downgraded to feature appearance (Derive). On 2013, you will have to use Clear tool to remove appearance override to the solidbody in the derive part and then manually apply Glass to the derived solid body. On 2016 and later, there is a more automated approach to this workflow.

Many thanks!