STL to IPT to STEP conversion

[Anonymous]

Hello all,

I received an exported STL file which was originally made in Rhino and I was able to open it in Autodesk 2019 and make it into IPT. However, when I try to export as STP, it saves no data.

Please, I need help with this because this isn't a large STL file at all (6MB) and I have a 8GB RAM laptop so memory shouldn't be an issue here (if it ever was one). My ultimate goal is to get a STP out of this file.

I tried SolidWorks but that is acting out worse than Inventor.

File attached below.

[JDMather]

Do you realize that stl is generally worthless for anything other than 3D printing?

AutodeskMeshEnabler

[Anonymous]

@JDMather I tried using a IGES file but it was stuck at 95%.

[Anonymous]

@JDMather I was able to make it into IPT but is it not possible that it would be able to save as STP since (I hope) it's not a graphics body?

[mcgyvr · Accepted solution]

You need to install/use Mesh Enabler..

https://apps.autodesk.com/INVNTOR/en/Detail/Index?id=6950391119076900441&appLang=en&os=Win64

Install that.. Open your stl.. Convert to base feature... Export as step..

[Anonymous]

@mcgyvr Thanks. Will try out and update.

[lena.talkhina]

Hello @Anonymous !

Did a suggested app helped to find a solution?
If yes, please click on the "Accept as Solution" button as then also other community users can easily find and benefit from the information.