Stability hotfix available to Nastran In-CAD 2018 users

johnsonshiue · ‎03-15-2018

Hi! If you are using Nastran In-CAD 2018 and you are encountering instability from time to time, please install the following patch. The hotfix was published on 2/20. But, our internal system indicates that some customers still have not installed the patch. Please install the hotfix as soon as possible. Detail about the fixes can be found in Release Note.

Hotfix to Nastran In-CAD 2018

https://knowledge.autodesk.com/support/nastran-in-cad/downloads/caas/downloads/content/autodesk-nast...

Hotfix to Nastran In-CAD 2018.2

https://knowledge.autodesk.com/support/nastran-in-cad/downloads/caas/downloads/content/autodesk-nast...

Many thanks!

Johnson Shiue (johnson.shiue@autodesk.com)
Software Test Engineer

mdavis22569 · ‎03-15-2018

Figures I'd get this:

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

---------
Mike Davis

Mark.Lancaster · ‎03-15-2018

@mdavis22569

Are you 100% sure you only have Nastran-In-Cad 2018.0 installed?

Mark Lancaster

& Autodesk Services MarketPlace Provider

Autodesk Inventor Certified Professional & not an Autodesk Employee

Likes is much appreciated if the information I have shared is helpful to you and/or others

Did this resolve your issue? Please accept it "As a Solution" so others may benefit from it.

mdavis22569 · ‎03-15-2018

Dang I had to 2nd guess myself on that one ....

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

---------
Mike Davis

Community

Stability hotfix available to Nastran In-CAD 2018 users

Stability hotfix available to Nastran In-CAD 2018 users

Stability hotfix available to Nastran In-CAD 2018 users