Community
Inventor Forum
Welcome to Autodesk’s Inventor Forums. Share your knowledge, ask questions, and explore popular Inventor topics.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Nuts & Bolts

6 REPLIES 6
Back to Inventor Category
Back to Topic Listing
Reply
Message 1 of 7
Anonymous
174 Views, 6 Replies
‎06-03-2003 11:01 PM

Nuts & Bolts

Anonymous
Not applicable
‎06-03-2003 11:01 PM
I have not used Inventor since Rel. 5. I am tring to figure out how to get fastners to come into my assembly files. Before it was place content? Where has this gone?
0 Likes
‎06-03-2003 11:01 PM

Nuts & Bolts

I have not used Inventor since Rel. 5. I am tring to figure out how to get fastners to come into my assembly files. Before it was place content? Where has this gone?
Report
0 Likes
Reply
6 REPLIES 6
Message 2 of 7
Anonymous
in reply to: Anonymous
‎06-03-2003 11:01 PM

Anonymous
Not applicable
‎06-03-2003 11:01 PM
In a assembly at the top of the browser click the down arrow next to Model.
There should be a library option.

--
Kent Keller
http://www.MyMcad.com/KWiK/Mcad.htm

Assistant Moderator
Autodesk Discussion Forum Moderator Program

"think" wrote in message
news:f16a3df.-1@WebX.maYIadrTaRb...
> I have not used Inventor since Rel. 5. I am tring to figure out how to get
fastners to come into my assembly files. Before it was place content? Where
has this gone?
0 Likes
‎06-03-2003 11:01 PM

In a assembly at the top of the browser click the down arrow next to Model.
There should be a library option.

--
Kent Keller
http://www.MyMcad.com/KWiK/Mcad.htm

Assistant Moderator
Autodesk Discussion Forum Moderator Program

"think" wrote in message
news:f16a3df.-1@WebX.maYIadrTaRb...
> I have not used Inventor since Rel. 5. I am tring to figure out how to get
fastners to come into my assembly files. Before it was place content? Where
has this gone?
Report
0 Likes
Reply
Message 3 of 7
Anonymous
in reply to: Anonymous
‎06-03-2003 11:03 PM

Anonymous
Not applicable
‎06-03-2003 11:03 PM
in the assembly browser the arrow next to Model
0 Likes
‎06-03-2003 11:03 PM

in the assembly browser the arrow next to Model
Report
0 Likes
Reply
Message 4 of 7
Anonymous
in reply to: Anonymous
‎06-04-2003 12:13 AM

Anonymous
Not applicable
‎06-04-2003 12:13 AM
however............most people stay away from that and use iparts. goto http://www.cbliss.com for many. also, see sean's FAQ for many more helpful sites. -Joe
0 Likes
‎06-04-2003 12:13 AM

however............most people stay away from that and use iparts. goto http://www.cbliss.com for many. also, see sean's FAQ for many more helpful sites. -Joe
Report
0 Likes
Reply
Message 5 of 7
Anonymous
in reply to: Anonymous
‎06-04-2003 05:16 AM

Anonymous
Not applicable
‎06-04-2003 05:16 AM
I have also been using iParts rather than the content library, so I am not
familiar with the library's current incarnation. But when discussing the use
of iParts rather than the library, my local VAR indicated Autodesk was still
promoting the library and they were working to overcome its limitations.

Has it been revised to address the concerns that led to the use of iParts in
lieu of the content library?
0 Likes
‎06-04-2003 05:16 AM

I have also been using iParts rather than the content library, so I am not
familiar with the library's current incarnation. But when discussing the use
of iParts rather than the library, my local VAR indicated Autodesk was still
promoting the library and they were working to overcome its limitations.

Has it been revised to address the concerns that led to the use of iParts in
lieu of the content library?
Report
0 Likes
Reply
Message 6 of 7
Anonymous
in reply to: Anonymous
‎06-04-2003 05:23 AM

Anonymous
Not applicable
‎06-04-2003 05:23 AM
> Has it been revised to address the concerns that led to the use of iParts
in
> lieu of the content library?

Not yet. This has been a complaint since it first came out. I (and others)
have expressed concern about the lack of progress in this area.

--
Sean Dotson, PE
http://www.sdotson.com
Check the Inventor FAQ for most common questions
www.sdotson.com/faq.html
-----------------------------------------------------------------------
"Michael Trull" wrote in message
news:B50A59D00CF46C73F5644B7ECF8AADB9@in.WebX.maYIadrTaRb...
> I have also been using iParts rather than the content library, so I am not
> familiar with the library's current incarnation. But when discussing the
use
> of iParts rather than the library, my local VAR indicated Autodesk was
still
> promoting the library and they were working to overcome its limitations.
>
> Has it been revised to address the concerns that led to the use of iParts
in
> lieu of the content library?
>
>
0 Likes
‎06-04-2003 05:23 AM

> Has it been revised to address the concerns that led to the use of iParts
in
> lieu of the content library?

Not yet. This has been a complaint since it first came out. I (and others)
have expressed concern about the lack of progress in this area.

--
Sean Dotson, PE
http://www.sdotson.com
Check the Inventor FAQ for most common questions
www.sdotson.com/faq.html
-----------------------------------------------------------------------
"Michael Trull" wrote in message
news:B50A59D00CF46C73F5644B7ECF8AADB9@in.WebX.maYIadrTaRb...
> I have also been using iParts rather than the content library, so I am not
> familiar with the library's current incarnation. But when discussing the
use
> of iParts rather than the library, my local VAR indicated Autodesk was
still
> promoting the library and they were working to overcome its limitations.
>
> Has it been revised to address the concerns that led to the use of iParts
in
> lieu of the content library?
>
>
Report
0 Likes
Reply
Message 7 of 7
Anonymous
in reply to: Anonymous
‎06-04-2003 06:26 AM

Anonymous
Not applicable
‎06-04-2003 06:26 AM
I still use the fastener library from IV4. Its just
faster than the new library.


style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
I
have not used Inventor since Rel. 5. I am tring to figure out how to get
fastners to come into my assembly files. Before it was place content? Where
has this gone?
0 Likes
‎06-04-2003 06:26 AM

I still use the fastener library from IV4. Its just
faster than the new library.


style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
I
have not used Inventor since Rel. 5. I am tring to figure out how to get
fastners to come into my assembly files. Before it was place content? Where
has this gone?
Report
0 Likes
Reply
Reply

Forums Links

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report

Report a website issue