Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Sketch 5 profile is not even centered to the Center Path rail?
Isn't this obvious?
----------------------------------------------------------------------------------------- Autodesk Inventor 2019 Certified Professional Autodesk AutoCAD 2013 Certified Professional Certified SolidWorks Professional
Sketch 5 profile is not even centered to the Center Path rail?
Isn't this obvious?
----------------------------------------------------------------------------------------- Autodesk Inventor 2019 Certified Professional Autodesk AutoCAD 2013 Certified Professional Certified SolidWorks Professional
in-spite of that path intersect the sketch in its center.
???
No Intersection?
----------------------------------------------------------------------------------------- Autodesk Inventor 2019 Certified Professional Autodesk AutoCAD 2013 Certified Professional Certified SolidWorks Professional
in-spite of that path intersect the sketch in its center.
???
No Intersection?
----------------------------------------------------------------------------------------- Autodesk Inventor 2019 Certified Professional Autodesk AutoCAD 2013 Certified Professional Certified SolidWorks Professional
Hi, keep in mind that loft will coat two profiles If you are going to use a guide curve I would recommend as far as possible that this curve intersects the base profiles used in the loft, not that it passes through its center of geometry (a recommendation somewhat different from the sweep that would place the route to the center), Another recommendation would be that the guide curve is smooth and does not have angled linear intersections to facilitate the loft task. If the guide curve does not intersect the profiles or intersects one and the other does not, it is possible to give you errors. I hope to have been clear and to help you solve your problem, greetings.
Please accept as solution and give likes if applicable.
I am attaching my Upwork profile for specific queries.
Hi, keep in mind that loft will coat two profiles If you are going to use a guide curve I would recommend as far as possible that this curve intersects the base profiles used in the loft, not that it passes through its center of geometry (a recommendation somewhat different from the sweep that would place the route to the center), Another recommendation would be that the guide curve is smooth and does not have angled linear intersections to facilitate the loft task. If the guide curve does not intersect the profiles or intersects one and the other does not, it is possible to give you errors. I hope to have been clear and to help you solve your problem, greetings.
Please accept as solution and give likes if applicable.
I am attaching my Upwork profile for specific queries.
Well Mr. Mather, thank you , your notice has worked well, but when I drew it, it was in the center and I didn't make any addition to it, so I don't know how did it move from place while my concentration is on the main sketch. Well, still learning from the faults.
Well Mr. Mather, thank you , your notice has worked well, but when I drew it, it was in the center and I didn't make any addition to it, so I don't know how did it move from place while my concentration is on the main sketch. Well, still learning from the faults.
