Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Is there an 'easy' way to see a cross sectional area and measure it? I have tried getting a cross-sectional area by off-setting a work plane into the model, sketching on that plane, and pressing F7. This shows the cross-sectional area, but when I click the inspect>area I can not select the cross-section. Any thoughts besides creating a sketch on that surface and extruding it to remove; taking the area measurement, and then undoing the extrusion?
----------------------------------------------------------------------------------------- Autodesk Inventor 2019 Certified Professional Autodesk AutoCAD 2013 Certified Professional Certified SolidWorks Professional
That is what I desire, however that is not a tool that is available in an assembly from what I can see. Any way to force the tool to be used in an assembly?
It would have to have a column for each part in the assembly.
I can see that becoming quite a problem with a lot of parts.
Maybe you can just edit the part in the context of the assembly. You would have to do this for each part.
----------------------------------------------------------------------------------------- Autodesk Inventor 2019 Certified Professional Autodesk AutoCAD 2013 Certified Professional Certified SolidWorks Professional
