How can I create rib with draft that is extended to a profile?

[SEC_CAD]

I need to create a rib that terminates at a profile that has a draft angle. All the online videos I have found use trivial square geometry or bound the rib at both ends (e.g. inside a shelled container).

I am trying to create a feature like Extrusion2, in the attached part file, but terminated at the profile.

I have tried ribs running normal and parallel to the sketch plane.

Rib1 allows me to specify a draft angle but does not let me extend to the profile.

Rib2 does not allow me to specify a draft angle but does let me extend to the profile.

How would I go about creating such a rib with a  draft that terminates at the profile?

THANKS

[admaiora · Accepted solution]

Hi,

just don't use the Rib command

[video]

[JDMather · Accepted solution]

I changed your design a bit - see Attached...

[SEC_CAD]

Thanks @JDMather and @admaiora . Both of these methods will work. Thank you both for taking the time to prepare the video and part file.