having trouble with pink dimensions

[Anonymous]

Dear community, 

i have been having trouble making drawings since every time i put in dimensions and later have to alter the model the dimensions just wont 

adjust to the new situation (see attached image).

my question is if there is a way to better ''lock'' or ''constraint'' the dimensions onto model features or something so when i for instance change the diameter of a pipe it changes with the new size.

[Rob67ert]

Hi there,

Is this an iPart or iAssembly?

[Anonymous]

this is an ipart (multi body part) placed in an assembly 

[Rob67ert]

This will happen if you change the iPart in the assembly.
For the dimension it will be a different part, so it is not able to connect the dimensions the the geometry.

[Anonymous]

is there a way to work around this ? 

[Rob67ert]

It depends on the geometry that will change in the different iPart members.
For instance, if you have a hole in one member and put a dimension on it, the dimension will ben pink if you choose another member without that hole.

[Anonymous]

In this case the roof nozzle only moved a bit to the left, where as all connected dimensions stayed behind

[Prav!n · Accepted solution]

You could not "Lock" or "Constrain" a dimension with respect to a Model/Geometry.

You can be able to Constrain Ur Views (Detailed / Sectional) with respect to the Geometry.

For Detail View:

Right Click and Select "Attach" to Lock the View Boundaries. So that if u r moving or updating the sizes it auto-populates itself.

For Sectional View:

Right Click and "Edit", Using Project geometries constrain it with the section line.

This could help you a little.

Regards,

S.Praveen