Hi, its a handle part developed in solidworks, need to develop the same in inventor, any steps or method would be fine, expecting suggestion or step by step guidance to develop in inventor
First of all, the part needs to be drawn so it has faces. That can be done with contour flange.
Afterwards, you choose the inner face before pressing "Create Flat Pattern"
On a part that has multiple directions in which the Thickness is the sheet metal thickness, you can get multiple different unfolds. Hence you need to select the stationary reference for the flat pattern.
You can put on fillets, but you need to make sure you keep a part of the face
hence I made the fillets 3,99 instead of 4,0 in this attached screenshot
Accepted solution
Hi
Look at this:
Kacper Suchomski
YouTube - Inventor tutorials | WWW | LinkedIn | Instagram
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
This video shows how to use the Bend Part command to bend bar or pipe parts in Inventor. The video also shows how to convert the model to an iPart so the part can be shown as bent or flat.
You are confusing concepts. To obtain a flat pattern, it is necessary to tear the material (even minimally).
Kacper Suchomski
YouTube - Inventor tutorials | WWW | LinkedIn | Instagram
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
You can go a different route and make a hold with FG. You will get the nominal length in the drawing in the BOM.
Kacper Suchomski
YouTube - Inventor tutorials | WWW | LinkedIn | Instagram
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
