Community
Inventor Forum
Welcome to Autodesk’s Inventor Forums. Share your knowledge, ask questions, and explore popular Inventor topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Flat Pattern - Issue with Flange Feature on Lofted Flange

1 REPLY 1
SOLVED
Reply
Message 1 of 2
eric.frissell26WKQ
332 Views, 1 Reply

Flat Pattern - Issue with Flange Feature on Lofted Flange

Hi, I have an issue getting a flat pattern from a flange and lofted flange feature and was wondering if anyone can help with this... The problem is that the bend reliefs seem to disappear when moving to the flat pattern and that's a problem for me because on all of our parts we have to put a little notch/bend relief to show the brake operators where to make the bends.  The relief is in place in the model but, again, when going to the flat pattern it creates that sharp corner with no relief.

 

ericfrissell26WKQ_0-1642187214344.png

ericfrissell26WKQ_1-1642187305012.png

 

 

1 REPLY 1
Message 2 of 2

Hi Eric,

Have a look at Corner Relief settings. Besides - your model appears to be way too complicated for a simple design.

Cheers,

Igor.

Web: www.meqc.com.au

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report