Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I have a 2d sketch attached to a view in an IDW. I changed the ,ipt and some hatching has blown up. Is it possible to edit the hatching or do I need to start all over with a new sketch? I can't seem to access the hatch to change it.
----------------------------------------------------------------------------------------- Autodesk Inventor 2019 Certified Professional Autodesk AutoCAD 2013 Certified Professional Certified SolidWorks Professional
I guess the idea is you replace one hatch pattern with another
just select the Fill/Hatch Sketch Region and select the region boundary again and change the pattern.
----------------------------------------------------------------------------------------- Autodesk Inventor 2019 Certified Professional Autodesk AutoCAD 2013 Certified Professional Certified SolidWorks Professional
Now I see - you don't really select the lines, but 1st click the fill/hatch command, and then selct the area, not the hatch lines. I find the 2d IDW sketching to be very confusing & inconsistent with the rest of the program.
Thanks!
