Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I just installed IV6 to play with and noticed something weird in the install
dialog. I only say a small part of the cancel button. Not a major gripe at
all just wondering if anyone was seen this before?
When you get going let me know if a 50 part ipn seems alot slower for you.
I have one where the assembly was migrated from 5.3, and the ipn made in 6.
It is a dog.
--
Cory McConnell
BJ pipeline Inspection
"KJohnson" wrote in message
news:3B6B99FEEE675BE62227ACE022132AAB@in.WebX.maYIadrTaRb...
> I just installed IV6 to play with and noticed something weird in the
install
> dialog. I only say a small part of the cancel button. Not a major gripe
at
> all just wondering if anyone was seen this before?
>
> Kathy Johnson
>
>
Righ now I am not finding any problems with speed. I have not tried a very
large assembly yet though.
Kathy Johnson
"Cory McConnell" wrote in message
news:96CA6002D05D36A4BF2B977FE4EE771A@in.WebX.maYIadrTaRb...
> I have not seen your problem.
>
> Finally decided to take the plunge did we?
>
> When you get going let me know if a 50 part ipn seems alot slower for you.
> I have one where the assembly was migrated from 5.3, and the ipn made in
6.
> It is a dog.
>
> --
> Cory McConnell
> BJ pipeline Inspection
> "KJohnson" wrote in message
> news:3B6B99FEEE675BE62227ACE022132AAB@in.WebX.maYIadrTaRb...
> > I just installed IV6 to play with and noticed something weird in the
> install
> > dialog. I only say a small part of the cancel button. Not a major
gripe
> at
> > all just wondering if anyone was seen this before?
> >
> > Kathy Johnson
> >
> >
>
>
I posted a cap of my ipn in CF. All the boards are subs. The wire harness
is subs in a sub. Zooming isn't that slow, but part selection is terrible.
Stretching trails is terrible. I ask you because you have done alot with
ipns.
--
Cory McConnell
BJ pipeline Inspection
"KJohnson" wrote in message
news:7435ECB097757D7F69BD6C4F7F48606E@in.WebX.maYIadrTaRb...
> Righ now I am not finding any problems with speed. I have not tried a very
> large assembly yet though.
>
> Kathy Johnson
> "Cory McConnell" wrote in message
> news:96CA6002D05D36A4BF2B977FE4EE771A@in.WebX.maYIadrTaRb...
> > I have not seen your problem.
> >
> > Finally decided to take the plunge did we?
> >
> > When you get going let me know if a 50 part ipn seems alot slower for
you.
> > I have one where the assembly was migrated from 5.3, and the ipn made in
> 6.
> > It is a dog.
> >
> > --
> > Cory McConnell
> > BJ pipeline Inspection
> > "KJohnson" wrote in message
> > news:3B6B99FEEE675BE62227ACE022132AAB@in.WebX.maYIadrTaRb...
> > > I just installed IV6 to play with and noticed something weird in the
> > install
> > > dialog. I only say a small part of the cancel button. Not a major
> gripe
> > at
> > > all just wondering if anyone was seen this before?
> > >
> > > Kathy Johnson
> > >
> > >
> >
> >
>
>
Yes, Kathy, I've seen this also. The right side of the install dialog box is cut-off on both my PC's here in the office. I think I've seen this starting with Inventor 5. I've never mentioned it because it's just the installer, and I only see it once (um, ok, I SHOULD only have to see it once). Take a look at my capture in CF.
Yes,
Kathy, I've seen this also. The right side of the install dialog box is
cut-off on both my PC's here in the office. I think I've seen this starting
with Inventor 5. I've never mentioned it because it's just the installer, and
I only see it once (um, ok, I SHOULD only have to see it once). Take a look at
my capture in CF.
Nice harness and board setup. The harnesses are something I generally avoid. 8^)
--
Kent
Member of the Autodesk Discussion Forum Moderator Program
"Cory McConnell" wrote in message
news:1C8CB7B3F2904F0E82605F2CB2B4BF6E@in.WebX.maYIadrTaRb...
> I posted a cap of my ipn in CF. All the boards are subs. The wire harness
> is subs in a sub. Zooming isn't that slow, but part selection is terrible.
> Stretching trails is terrible. I ask you because you have done alot with
> ipns.
Good eye. That is the first harness I have done, It has made it through
several changes and will probably see a few more. I am not real happy with
the explosion - I got fed up waiting for things to select.
--
Cory McConnell
BJ pipeline Inspection
"Kent Keller" wrote in message
news:1F4B23190FCC06342FAE6C46070AA8A7@in.WebX.maYIadrTaRb...
> Not sure but does that QFP look familiar
>
> Nice harness and board setup. The harnesses are something I generally
avoid. 8^)
> --
> Kent
> Member of the Autodesk Discussion Forum Moderator Program
>
>
> "Cory McConnell" wrote in message
> news:1C8CB7B3F2904F0E82605F2CB2B4BF6E@in.WebX.maYIadrTaRb...
> > I posted a cap of my ipn in CF. All the boards are subs. The wire
harness
> > is subs in a sub. Zooming isn't that slow, but part selection is
terrible.
> > Stretching trails is terrible. I ask you because you have done alot
with
> > ipns.
>
>
