Community
Inventor Forum
Welcome to Autodesk’s Inventor Forums. Share your knowledge, ask questions, and explore popular Inventor topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Content Center

3 REPLIES 3
SOLVED
Reply
Message 1 of 4
vasN5QQD
432 Views, 3 Replies

Content Center

vasN5QQD
Advocate
Advocate

Australian standards was working for couple of times then it was greyed out. Have I done somecontent center.jpgthing wrong?

0 Likes

Content Center

Australian standards was working for couple of times then it was greyed out. Have I done somecontent center.jpgthing wrong?

3 REPLIES 3
Message 2 of 4
A.Acheson
in reply to: vasN5QQD

A.Acheson
Mentor
Mentor
Accepted solution

According to the image you have a filter in place see the highlighted buttons in blue. You may need to change the filter group name back. 
Post 7 of this link has a good image of the filters. 

https://forums.autodesk.com/t5/inventor-forum/content-center-publish-part-problem/td-p/5910751

 

 

If this solved a problem, please click (accept) as solution.‌‌‌‌
Or if this helped you, please, click (like)‌‌
Regards
Alan

According to the image you have a filter in place see the highlighted buttons in blue. You may need to change the filter group name back. 
Post 7 of this link has a good image of the filters. 

https://forums.autodesk.com/t5/inventor-forum/content-center-publish-part-problem/td-p/5910751

 

 

If this solved a problem, please click (accept) as solution.‌‌‌‌
Or if this helped you, please, click (like)‌‌
Regards
Alan
Message 3 of 4
vasN5QQD
in reply to: A.Acheson

vasN5QQD
Advocate
Advocate
Accepted solution

It worked. Thank you so much, I was going crazy trying to work it out.

0 Likes

It worked. Thank you so much, I was going crazy trying to work it out.

Message 4 of 4
A.Acheson
in reply to: vasN5QQD

A.Acheson
Mentor
Mentor

Yes I have been there done that. After a while in the CC editor window your eyes 👀 grow tired and you tend to miss these things. If you can’t find items in future there is either a filter on or your in the wrong library or the library isn’t loaded or you don’t have it. Glad your on your way. Have fun 🤩 

If this solved a problem, please click (accept) as solution.‌‌‌‌
Or if this helped you, please, click (like)‌‌
Regards
Alan
0 Likes

Yes I have been there done that. After a while in the CC editor window your eyes 👀 grow tired and you tend to miss these things. If you can’t find items in future there is either a filter on or your in the wrong library or the library isn’t loaded or you don’t have it. Glad your on your way. Have fun 🤩 

If this solved a problem, please click (accept) as solution.‌‌‌‌
Or if this helped you, please, click (like)‌‌
Regards
Alan

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report