Add Radial Pin

[Anonymous]

Hello Forum,

I cant seem to select an existing hole when I want to add a radial pin

Can someone help me?

Please

TIA

Haziq

[Xun.Zhang]

@Anonymous,

Are you talking about Harness -> Place pin?

If so, please select edge instead of surface.

else, could you help show more detail about your workflow, I am not quite sure about what you are talking.

Thanks

[Anonymous]

I would like to use radial pin to attach the adapter and pendulum support together.

Sorry for not being clear the first time.

[TheCADWhisperer]

I noticed that some of your sketches are not dimensioned?

I noticed that you are creating Adaptive parts - is this what you really intended?

I noticed that you are creating multi-body solids - is this what you really intended?

Did you use Hole feature to create your holes, or did you use Extrude-cut circle?

http://help.autodesk.com/view/INVNTOR/2018/ENU/?guid=GUID-A0994478-E81C-4FFF-A741-0E8C3EF5EE80

[erdogan_isik]

Re: Add Radial Pin 

Options

02-01-2018 10:45 AM in reply to: MdHaziq

I noticed that some of your sketches are not dimensioned?

I noticed that you are creating Adaptive parts - is this what you really intended?

I noticed that you are creating multi-body solids - is this what you really intended?

Did you use Hole feature to create your holes, or did you use Extrude-cut circle?

http://help.autodesk.com/view/INVNTOR/2018/ENU/?guid=GUID-A0994478-E81C-4FFF-A741-0E8C3EF5EE80

Continue and...

 

I created th hole with hole feature

[erdogan_isik]

I noticed that some of your sketches are not dimensioned?

I noticed that you are creating Adaptive parts - is this what you really intended?

I noticed that you are creating multi-body solids - is this what you really intended?

Did you use Hole feature to create your holes, or did you use Extrude-cut circle?

http://help.autodesk.com/view/INVNTOR/2018/ENU/?guid=GUID-A0994478-E81C-4FFF-A741-0E8C3EF5EE80

Continue and...

 

I created th hole with hole feature

[Anonymous]

Hello TheCADWisperer,

Thankyou for looking at my thread and replying.

1. I do not have all the dimensions with me so I am just drawing to get the idea out.

2. I changed my settings to draw adaptive parts. Not really knowing the purpose

3. I create in multibody solids because it is easier for me to fit them together. and yes it is intended. There should be a total of 2 solids but I went too far with it

4. I use extrude cut to create my holes which I want to use to create a pin though them.

   Now I know that I have to create a hole feature in order for me to create a radial pin through them.

   Is there a way for me to do it without redrawing?

TIA

Haziq

Do you have a website?