Currently have 4 users who may use NASTRAN IN-CAD for Inventor 2015 or 2016. But there's only one license for NASTRAN... So when one of these users launch Inventor (and is only using Inventor), it appears to be pulling the NASTRAN license as well. Meaning when one of the other 3 users actually need NASTRAN in Inventor they can't because there's no license avaliable. Is there a way I can control this so the NASTRAN license is only pulled when needed?
Mark Lancaster
& Autodesk Services MarketPlace Provider
Autodesk Inventor Certified Professional & not an Autodesk Employee
Likes is much appreciated if the information I have shared is helpful to you and/or others
Did this resolve your issue? Please accept it "As a Solution" so others may benefit from it.
Solved! Go to Solution.
Solved by DarrenP. Go to Solution.
i have confirmed this
it seems when the add in is loaded in Inventor it grabs a Nastran In CAD license even through your not using it
if you uncheck load automatically in the Inventor Add Ins it will not grab a license
DarrenP
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
DarrenP
Thanks for confirming this...
Mark Lancaster
& Autodesk Services MarketPlace Provider
Autodesk Inventor Certified Professional & not an Autodesk Employee
Likes is much appreciated if the information I have shared is helpful to you and/or others
Did this resolve your issue? Please accept it "As a Solution" so others may benefit from it.
Can't find what you're looking for? Ask the community or share your knowledge.